How to Repair Lawn After Tree Removal?

Tree removal is a big task and it could leave our lawn could be in a bad shape. You will have to make efforts to get your lawn back to the lush green it used to be. It is not a day’s job, but you must get down to it as soon as possible. If only part of the lawn has been affected, you should ensure the rest of the areas of the lawn at least stay protected.

Clearing up the Area

You may find a lot of mulch covering the lawn lying about. This must be removed first. This is because the mulch may retain heat and transmit down to the grass and even burn it. Once you have removed the mulch, inspect to see which parts of the yard you must grow the grass again.

Growing Grass

You must keep the following ready to begin the process of planting grass again:

  • Grass seeds
  • Fertilizer (Nitrogen-rich)
  • Topsoil
  • Rake
  • Shovel
  • Gloves

Start by clearing the area using the rake. You must use the shovel to turn the soil over to give the top of the soil a fresh feel. Now spread the fertilizer around the area. You can use your gloved hand to do this. If you are comfortable using bare hands, it should not be a problem. The fertilizer has to be rich in nitrogen badly needed for the grass to grow thick and quick.

Next, spread the topsoil in the area. Your local store should be able to offer you the right quality topsoil. Once you have spread the topsoil, use the rake to even out the mixture over the surface.

In the next step, you must seed the grass in this prepared bed. Be liberal with the seeds and move back and forth to ensure the coverage is total. You should use the rake again to make sure the seeds and the earlier mix of fertilizer and topsoil are all nicely bonding together. You can spread more topsoil over this and you are good to go in preparing a fresh lawn.

Lastly, water the lawn well. There should be a minimum time lag between sowing the seeds and watering it. If the seeds go dry, the grass won’t come up. Watering is a critical part of growing healthy grass. You have to spare the time and effort to water the lawn regularly.

Leaving it to a Professional Agency

Some people are very busy to be able to do all these activities themselves. There can be other reasons for not doing it too. There are quite a few agencies that specialize in tree removal in Hayward CA and would be willing to do the job for you for a fee. You can leave it to them to select the fertilizer and topsoil. They will check with you the kind of grass you want to have in your lawn. The agency or an individual expert will fix the time with you and finish the job to your satisfaction. You or a member of your family must take the responsibility for watering the lawn regularly.

Once you have the lawn green and proper, it has to be maintained. Mowing the grass and keeping it watered are tasks you cannot ignore if you like your lawn.


How to Repair Drywall Corner?

The corner beads in drywalls can get damaged often. The chip may be small but has to be repaired immediately to prevent it from spreading further. If you are living in a rented property, the house owner may adjust your deposit in full for this minor blemish. If you call in an agency to the repair, they will charge you a bomb. The ideal way for you is to learn how to repair a damaged drywall corner and save dollars. It is a simple task and does not consume much time either. You should have the tools and the inputs needed to do the job and a little bit of an inclination from your side.

Things Needed to Repair Drywall Corner

You will need the following simple tools and other items to carry out the drywall corner repair:

  • Tape measure and pencil
  • Drywall knives, 4-inch and 6-inch
  • Sandpaper 80 grit and 120 grit
  • Joint compound
  • Corner bead (metal or vinyl)
  • Screwdriver
  • Paint & brush

You will need a waste cloth to clean the surface and water. The joint compound should be easily available at your nearest hardware or paint supplies store.

The Step by Step Process of Repairing Drywall Corner

  • You will first measure and mark the area where the drywall has been damaged and the measuring tape and pencil can be used for this purpose.
  • Now, use the knife to scrape the portion of the corner wall until you reach the corner bead. It could be metal or vinyl. Metal screws are usually screwed to the wall while vinyl beads will be secured with tape. You must carefully remove the bead from the portion you are repairing of the drywall.
  • Replace the corner bead with a new supply. The same process is to be followed; if it is a vinyl, tape it and if it is metal, fasten with screws.
  • You must now apply the joint compound using the 4-inch drywall knife. You can be liberal while applying the compound since it tends to shrink as it dries.
  • You need not fret about getting its perfect in the corners.
  • You will need to let it dry for 12 hours.
  • Once dried, you can use the sandpaper to even out the surface.
  • You can apply another coat of the joint compound; this time, make it thinner using a smaller drywall knife.
  • This will dry in just around 2 hours.
  • You should now use the softer 120 grit sandpaper to further smoothen the surface
  • Your drywall corner stands repaired.
  • Lastly, paint the portion to match with the rest of the wall and the naked eye may not notice that repair has been carried out.

Note: You must clean the surface after using the sandpaper to remove the dust. You can use a mildly damp cloth for it and not splash water all over.

If you had called in an agency specializing in Drywall repair in Washington DC, they would have done this same thing and charged you for it. You have not only saved the dollars, but you have learned a new skill and you will feel motivated to do similar activities around the house on your own. This is a healthy practice and not everyone gets the opportunity.

How Much Do House Painters Charge?

House painters quote their prices based on how big your house is and how long it will take them to complete the painting task. If the house is large, more paint will be consumed and the man-hours spent will be more. The effort needed to paint the kitchen may not be the same as painting an empty bedroom. Painting the exterior of the house will require certain additional equipment. You will be surprised to learn that the hourly salaries paid to house painters differ from state to state. It is therefore not possible to have a standard rate the house painters in Washington DC will charge.

The Different Areas Within House Painting

The term house painting encompasses a variety of areas or sub-tasks each requiring a different approach. The regular painting of the living room and bedrooms that include the walls, ceiling, and doors and windows cannot be ignored. Besides, there are areas like the kitchen, basement, if you have one, and the bathrooms.

House painting can include the exterior as well. Here, depending on the type of finish the walls have been given, the painting requirements can change. Before applying the paint, the exterior walls will have to be given a wash and then scraped and primed. The wooden windows exposed to the vagaries of the weather will have to be thoroughly examined and if any damages are noticed, these will have to be repaired.

You will concede that the task of house painting, though appears simple and straightforward to a layperson, can be quite a complicated exercise. In particular, estimating how much the house painter will charge is not that easy.

Choosing the Right Paint

In as much as the type of activity involved in carrying out painting work in a house is diverse, the options in terms of the paint to be used are also aplenty. You might be coming across advertisements by different paint brands, each claiming theirs to be superior. Some will claim their exterior paint is dust repellent and another will say their wall paint is washable and so on. If you are not very familiar with these aspects, you will depend on the house painter to guide you through the selection of the right paint for each application. The color of paint to be used can be chosen by you.

Making an Estimation of How Much It Will Cost

With these inputs, you can get a rough estimate of the cost you will incur in getting your house painted by an expert house painter. The thumb rule employed by the house painters is usually a base figure per square foot of painting done. If you have a bedroom that is 12-feet x 12-feet, you have 4 side-walls and the ceiling, the doors and windows, and the closet. These could set you back by around $2,000. This would be based on mid-grade paint, the minimum amount of preparatory work, and one coat of paint. Any additional coat of paint will cost you more. This amount is only for the interior and one bedroom. Keep increasing the cost as you add more areas and the exterior. A rough estimate is $3 per square foot.